Texas Workers Compensation

Workers Comp Ghost Policy in Texas

Last reviewed by Garrett Amundsen, Chief Operating Officer (NPN 21727795)

Short answer. Ghost policy is shorthand for a workers compensation policy written for a business with no employee payroll and the owner excluded, issued at the carrier's minimum premium so a general contractor can be given a certificate. Texas does not require workers comp for most private work; the pressure comes from your GC's subcontract or from a public project under Labor Code 406.096. Texas also has two written agreements that can replace the policy, and a TDI rule that most carriers read as needing at least one employee. TradeGuard places owner-only workers comp in Texas, including for one-person sole proprietorships, and issues the certificate once bound. Call (913) 689-5474 or request a quote.

Do you need workers comp if you work alone in Texas?

No, by state law. Labor Code 406.002 says that “except for public employers and as otherwise provided by law, an employer may elect to obtain workers' compensation insurance coverage.” TDI's guide: “Texas doesn't require most private employers to have workers' compensation. But private employers who contract with government entities must provide workers' compensation coverage for the employees working on the project.”

Two things follow for a one-person business. First, if you have employees and do not carry coverage you are a non-subscriber, and TDI says you must file an annual notice with the Division, post notices in your workplaces and tell new employees in writing that they are not covered. With no employees there is nothing to notify about. Second, if you do carry coverage, Labor Code 406.097 makes you, as a sole proprietor or partner, entitled to benefits under it unless you are “specifically excluded from coverage through an endorsement.” The agency page is TDI's workers' compensation insurance guide, in the Sources list.

Who is covered by default in Texas, by entity type

Texas is different from Kansas and Missouri because coverage is elective for everyone. The table is about what happens once a business elects coverage, and where the statute is silent we say so.

Texas workers compensation treatment of owners by entity type
EntityCovered by default?Can elect in or out?Filing or formWhat the certificate showsSource
Sole proprietorCoverage itself is elective for private employers, so nothing is required by default. If the business elects coverage, the sole proprietor is entitled to benefits as an employee unless specifically excluded by endorsement.Elect coverage for the business (406.002); exclude or include the owner by endorsement (406.097).No state filing to buy a policy. An employer that does not carry coverage must file an annual notice with the Division of Workers' Compensation and post and give notices to employees (406.004, 406.005; TDI guide).A workers comp policy on the business; the owner exclusion is an endorsement the GC may ask to see.TLC 406.002, 406.097(a); TDI guide
PartnerSame as a sole proprietor: elective, and a partner is entitled to benefits under an elected policy unless excluded by endorsement.Yes, by endorsement.Same as a sole proprietor.Same as a sole proprietor.TLC 406.097(a)
Single-member LLCNot addressed in the chapter 406 text we read, which names sole proprietors, partners and corporate executive officers but not LLC members. Confirm with TDI's Division of Workers' Compensation.Not addressed in the chapter 406 text we read; confirm with TDI DWC at 800-252-7031.Same non-subscriber notices apply if the LLC has employees and does not carry coverage.A policy on the LLC; how the member is treated depends on the carrier's endorsement.Not addressed in TLC ch. 406 as read; TDI DWC 800-252-7031
Multi-member LLCNot addressed in the chapter 406 text we read.Not addressed; confirm with TDI DWC at 800-252-7031.Same non-subscriber notices apply if the LLC has employees and does not carry coverage.A policy on the LLC.Not addressed in TLC ch. 406 as read; TDI DWC 800-252-7031
Corporate officerElective, like everyone else in Texas. Under an elected policy an executive officer is entitled to benefits unless excluded by endorsement.An officer with at least 25 percent equity may be excluded, and that exclusion holds even on a public project under 406.096.Endorsement to the policy; no state filing for the exclusion.A policy on the corporation; TDI notes some insurers will sell a policy covering executive officers of a business with no other employees.TLC 406.097(a),(b),(c); TDI guide

Why owner-only contractors buy one anyway

  • The GC requires it by contract. TDI's guide says it plainly: “Texas doesn't require most private employers to have workers' compensation,” and in the same paragraph, “Some contractors may require their subcontractors and independent contractors to have workers' compensation.” Nothing in chapter 406 stops them.
  • The project is public. Under Labor Code 406.096 a governmental entity that enters a building or construction contract must require the contractor to certify in writing that it provides coverage for each employee on the project, and “each subcontractor on the public project shall provide such a certificate relating to coverage of the subcontractor's employees to the general contractor.” If you sub on a school, city or county job, the certificate is a statutory requirement, not a preference.
  • Otherwise the GC may be charged for you. Subchapter G lets a hiring contractor and an independent contractor file a joint agreement declaring the sub an independent contractor; once filed, “an insurance company may not require the payment of an insurance premium by a hiring contractor for coverage of an independent contractor.” Without that agreement or your own certificate, the GC's insurer can price you into the GC's policy.
  • That exposure is why general contractors run their subcontractor documentation through TradeGuard Compliance, which verifies each sub's policy with the carrier and keeps the audit file current so the GC's own audit ends without a charge for its subs.

Who writes it and which trades qualify

Buy only from a carrier licensed by the Texas Department of Insurance. TDI's guide warns that a policy from an unlicensed company “doesn't count as coverage under state law,” and that so-called alternative policies are not workers compensation and leave you open to suit. Texas Mutual Insurance Company is the state's insurer of last resort if no voluntary carrier will write you.

TradeGuard places owner-only workers comp in Texas with an admitted carrier TradeGuard is appointed with. Quotes come back within 24 to 48 hours.

Eligibility is decided at quote, not from a published list. Tell us your trade and whether anyone other than you is paid to work, and we confirm whether a carrier will take it within 24 to 48 hours.

The Texas catch: most carriers will not write a one-person sole proprietorship

TDI's consumer guide states: “You must have at least one employee to buy workers' compensation insurance. The employee may be part-time. Some insurance companies will sell a policy to cover executive officers of a business that has no other employees. You can also buy insurance if you employ contractors who don't have workers' compensation.”

Read that against the owner-only sub. Most carriers will not write a true one-person sole proprietorship in Texas, which is why the question gets asked. The markets TradeGuard places owner-only policies with will, and the result is the Texas version of the ghost policy: a minimum-premium policy on the business with the owner excluded by endorsement under 406.097, and a certificate the GC can accept. Quotes come back within 24 to 48 hours. The statutory alternatives below exist for the GC who would rather sign an agreement than collect a certificate.

The two written agreements that replace a ghost policy in Texas

Subchapter G of Labor Code chapter 406 applies to residential work and to commercial structures of no more than three stories or 20,000 square feet. It defines an independent contractor as one paid by the job rather than by the hour, free to hire and pay helpers, and free to work for other contractors. Two agreements follow.

  • 406.144, the coverage agreement. The independent contractor and the hiring contractor sign a written agreement under which the hiring contractor may withhold the cost of coverage from the contract price and, for workers comp purposes only, is the employer of the independent contractor and its employees. The statute says this can be done “even if the independent contractor does not have an employee.” The hiring contractor sends a copy to its carrier. This is how an owner-only sub gets covered under the GC's policy by written agreement.
  • 406.145, the joint agreement. Both sign a declaration that the sub is an independent contractor and not the hiring contractor's employee, on the commissioner's form, filed with the Division. The sub then is not entitled to coverage through the GC, and the GC's insurer may not charge the GC premium for the sub. It applies to each hiring agreement between the two for one year from filing.

Neither produces a certificate in your name. If the subcontract's insurance exhibit asks for a certificate of your own workers comp, these agreements do not satisfy it; they change who is liable and who gets charged. We read the exhibit and tell you which instrument the GC will actually accept.

What it costs

We do not publish Texas pricing until our producer has confirmed it against policies we are placing there. For what sets the number anywhere, see what a ghost policy costs, and for a current figure request a quote.

The audit

  • Uninsured subs land on your payroll. If you carry a policy and pay someone to work who cannot show their own coverage for the dates you paid them, the carrier treats those payments as your payroll at audit. TDI's guide notes you can buy a policy specifically because “you employ contractors who don't have workers' compensation.”
  • A 1099 does not decide it. In Texas the statutory independent contractor test in 406.141 is paid by the job, free to hire helpers, free to work for others. A joint agreement under 406.145 settles it as a matter of law; a tax form does not.
  • A helper on a few jobs is payroll. On an officer-only or minimum-premium policy, a helper's wages are the first real payroll the carrier sees, and the bill arrives at audit. Tell us before the helper starts.
  • The moment you start paying subs, this becomes the whole game. Every 1099 payment to a sub who cannot prove their own coverage for those dates is added to your policy as payroll at audit. TradeGuard Compliance was built to deliver the opposite outcome: a penalty-free audit, a lower premium, and your time back. We collect each sub's certificate, verify the policy directly with the carrier and re-verify it through the term, match coverage dates to payment dates, and hand your auditor one file with every document in it. One client's $30,000 audit charge went to $0 that way. See how to keep 1099 payments off your audit and TradeGuard Compliance.

When a general contractor will not accept one

A real policy and an accurate certificate can still fail the GC's review. The usual Texas reasons:

  • The subcontract requires coverage for everyone performing the work, including working owners, and your policy excludes you by endorsement under 406.097.
  • The job is public. Under 406.096 the GC must pass your certificate to the governmental entity, and some entities will not accept owner exclusions even though 406.097(c) permits them for 25 percent owners.
  • The GC wants a certificate and you are offering a joint agreement under 406.145 instead. The agreement protects the GC from premium charges; it is not proof of coverage.

Ask the GC: “Does your subcontract require a certificate of workers comp in my name, or will you sign a joint agreement under Labor Code 406.145?” The answer tells you whether you are shopping for a policy or for a notary. See also how owner exclusions work in Kansas and Missouri if you also work there.

Add general liability and get the certificate the same day

The subcontract that asks for your workers comp certificate almost always asks for general liability on the same page, with the general contractor as additional insured. Quoting both at once is faster and usually cheaper than bolting one onto the other later, and it means one certificate covers the whole insurance exhibit. On policies TradeGuard writes we issue certificates in the vast majority of cases within two minutes, guaranteed within 24 hours.

Request a certificate of insurance if you are already insured with us. For a combined general liability and workers comp quote, request a quote or call (913) 689-5474.

How TradeGuard handles this

  1. Tell us your entity type, your trade, whether anyone other than you is paid to work, and whether the job is public or private. In Texas those answers decide whether a policy can be written at all.
  2. Send the subcontract's insurance exhibit. We tell you whether it requires a certificate in your name or will accept a 406.144 or 406.145 agreement.
  3. If a policy is the answer, we quote it within 24 to 48 hours from an admitted carrier TradeGuard is appointed with in Texas, with general liability if the exhibit requires it, and send the premium and every fee in writing.
  4. On bind we issue the certificate to the GC in the form it asks for.
  5. Before the term ends we tell you what the auditor will ask for.

TradeGuard Insurance is a licensed insurance agency (NPN 22154473) based in Leawood, Kansas, licensed in Texas.

Get the Texas Certificate Your GC Asked For, Before You Bid.

FAQ

Frequently asked questions

From an agent appointed with a Texas-licensed carrier willing to write a minimum-premium policy on a business with no employees. TDI's guide says you must have at least one employee to buy a policy unless the insurer will cover a business with no other employees, and most will not. The markets TradeGuard places owner-only policies with will write a one-person Texas sole proprietorship with the owner excluded by endorsement under Labor Code 406.097, and we quote it within 24 to 48 hours. Call before you bid so the certificate exists before the start date.

The carrier's minimum premium for your class code plus any fees and endorsements, because an owner-excluded policy with no employees has no payroll to rate. We publish a Texas figure only once our producer has confirmed it against policies we are placing there. What moves the number is on our ghost policy cost page.

Ask the GC first whether it needs a certificate in your name or will sign a joint agreement under Labor Code 406.145 declaring you an independent contractor, which stops its insurer charging it premium for you. If the exhibit requires a certificate, you need a minimum-premium policy on your business with you excluded, and TradeGuard places those in Texas for one-person businesses and issues the certificate once bound.

The chapter 406 text we read addresses sole proprietors, partners and corporate executive officers in 406.097 and does not name LLC members. We are not going to guess. Confirm with TDI's Division of Workers' Compensation at 800-252-7031, and know that in practice the carrier's endorsement decides whether a member is included or excluded on an elected policy.

Yes. TDI's guide says most private employers are not required to carry coverage and, in the same breath, that some contractors require their subcontractors and independent contractors to have it. On a public project the requirement is statutory under 406.096. State law sets what you must carry; the subcontract sets what the GC will accept.

Yes, on residential and small commercial work. Labor Code 406.144 lets an independent contractor and a hiring contractor sign a written agreement under which the hiring contractor may withhold the cost of coverage from the contract price and becomes your employer for workers comp purposes only, and the statute says this works even if the independent contractor has no employees. The hiring contractor sends a copy to its carrier. It does not give you a certificate in your own name.

The exclusion itself is allowed. Labor Code 406.097(c) says a sole proprietor, partner or corporate officer with at least 25 percent equity may be excluded from coverage notwithstanding 406.096, the public-project section. But 406.096 requires each subcontractor to give the GC a certificate relating to coverage of the subcontractor's employees, and the governmental entity's contract can set its own insurance terms. Send us the project's insurance requirements before you bid.

Many will, because what the GC needs is a certificate so its own insurer stops charging it for you. Some will not, because the subcontract requires coverage for working owners or the public owner's terms prohibit exclusions. Send us the insurance exhibit before you bind; if it requires owner coverage the fix is an included-owner policy or a written exception, not a reworded certificate.

Sources

Every legal statement on this page traces to one of these primary sources. The date is when we last read the text at that address.

  1. Texas Labor Code 406.002, Coverage generally elective

    Except for public employers and as otherwise provided by law, an employer may elect to obtain workers' compensation insurance coverage.

    Checked

  2. Texas Labor Code 406.096, Required coverage for certain building or construction contractors

    A governmental entity's building or construction contract requires the contractor to certify coverage for each employee on the public project, and each subcontractor gives its certificate to the general contractor.

    Checked

  3. Texas Labor Code 406.097, Executive employees of certain business entities

    A sole proprietor, partner or corporate executive officer of an entity that elects coverage is entitled to benefits unless specifically excluded by endorsement; a sole proprietor, partner or officer with at least 25 percent equity may be excluded notwithstanding 406.096.

    Checked

  4. Texas Labor Code 406.141 to 406.146, Coverage of certain building and construction workers

    Independent contractor definition, the written agreement under which a hiring contractor provides coverage for an independent contractor (406.144), and the joint agreement declaring the subcontractor an independent contractor (406.145).

    Checked

  5. Texas Department of Insurance, Workers' compensation insurance guide

    Texas does not require most private employers to carry coverage; contractors with government entities must; you must have at least one employee to buy a policy, though some insurers cover executive officers with no other employees; buy only from TDI-licensed companies.

    Checked

  6. Texas Department of Insurance, Division of Workers' Compensation, Coverage verification

    Subscriber and non-subscriber categories, and how coverage is verified.

    Checked